We are happy to introduce our new Jomox 19" euro rack module series.
In the 19” euro rack market we also want to keep our concept of storeable analog sound production because it offers just too many advantages.
In order to achieve this, we had to
develop a complete new analog control system for our circuitries
inside these modules.
like to make these euro rack products interesting for both live
drummers and modular people. Therefore, a CV/Gate control and trigger
inputs for drumpad pickups are available.
regular modular use, analog routable CV inputs and an analog output
are accessible via 3.5mm jacks. The Gate can be configured as 0-5V (0-15V is accepted too), inversed or s-trigger.
is storeable and can be recalled via encoder klick from 100 presets.
But for the analog feel of modular, eight potentiometers give you the
fine and precise editing of the most important parameters without
stepping through menus.
can create complete E-drum setups, because there is an internal Jomox
analog connection bus with a fast digital link which can do a submix
and an FX send mix from each module hooked up to the bus.
With this system bus you won't need to use the audio outputs but instead you have a
programmable bus system that can link to future master, sequencer
and mixing or effects modules - which can take control over the single modules.
makes the whole modular setup recallable and storeable from a center module like a drum
to link the ModBase modules to our other products, they all have a
Midi interface on the rear that can be wired within the rack case and
being cascaded from one module to another.
The menu selection is
paged by two-colored LEDs for both sides of the menu.
Two internal LFOs which both control the tuning of the kick drum VCO expand the sound spectrum once more.
All analog parameters are either storeable and controllable via Midi. The Midi notes control the pitch of the kick drum VCO.
the modules are controllable via CV/Gate and via trigger pads for live
drummers. With the trigger input, the threshold and velocity dependend
dynamics can be adjusted.
Four routable CV inputs let all
internal sound parameters (incl. LFOs and metallic noise) be controlled
by CV sequencers. Every CV input provides an own programmable amount
which can be negative too (i.e. subtracting the CV value from the
internal value). The range goes from 0..5V.